10.6

442Logic Pro Instruments
• The zones of the focused group are displayed in the foreground and can be graphically
edited.
• The zones of the other selected groups are still visible but dimmed.
• Only zones in the focused group can be selected and edited or previewed.
• Click a group name to select it and to move focus to the group. Shift-click or drag (from
an empty area outside any group) to select multiple groups. The Key Mapping Editor
above the keyboard shows only zones that belong to the selected group, or groups. You
can also remotely select groups with your MIDI keyboard.
Note: To enable group selection with your MIDI keyboard, turn on the Select from Last
Played Keys > Groups or Groups and Zones menu option in the Mapping pane Edit
menu.
• Click a group number to move focus to that specific group when multiple groups are
selected.
• Click a zone to select it. Shift-click or drag (from an empty area outside any zone) to
select multiple zones. You can adjust zone parameters shown below the keyboard.
Select zones or groups using Edit menu commands
• In Logic Pro Sampler, choose one of the following zone and group selection commands
from the Edit menu:
• Select All: Selects all zones and groups of the loaded sampler instrument.
• Deselect All: Selects none of the zones and groups of the loaded sampler
instrument.
• Select Unused: Selects all unused zones and groups of the loaded sampler
instrument.
Note: If a group has focus in Zone view or the Key Mapping Editor, this will affect the
criteria used by this command.
• Invert Selection: Switches the current selection. For example, if you have selected all
unused zones and groups of the loaded sampler instrument, choosing this command
will select all used zones and groups.