10.6

415Logic Pro Instruments
• Remap Black Notes: Use to remap all selected zones to black notes only.
• Remap to Root Notes: Use to remap all selected zones to their respective root key
positions.
• Remap Velocities: Use to open a dialog where you can specify a velocity range that is
applied to all selected zones.
• Remap White Notes: Use to remap all selected zones to white notes only.
Use Mapping pane Zone menu Loop commands
In Logic Pro Sampler, choose any of the following commands or functions from the Zone >
Loop menu:
• Auto-Loop: Use to analyze the selected zone and to automatically set loop start and
loop end marker positions.
• Optimize Loop Start: Use to automatically adjust the loop start point to create a smooth
loop cycle.
• Optimize Loop Crossfade/End: Use to automatically set crossfade values at the point in
the loop cycle where the loop end and loop start markers cross over. The loop length is
not affected.
• Set End to Loop End: Use to move the (sample) end marker to the current loop end
position.
• Set Loop from Start to End: Use to move the loop start and end markers to the (sample)
start and end marker positions.
• Set Start to Loop Start: Use to move the (sample) start marker to the current loop start
marker position.
Use Mapping pane Zone menu Audio Files commands
In Logic Pro Sampler, choose any of the following commands or functions from the Zone >
Audio Files menu:
• Detach: Use to remove the audio file association from the selected zone.
Tip: This results in an empty zone.
• Write Loop: Use to write loop start and end data to the header of the audio file
associated with the selected zone.
• Write Mapping: Use to write mapping data, such as the root key, the key range, and the
velocity range to the header of the audio file associated with the selected zone.
Use Mapping pane View menu commands
In Logic Pro Sampler, choose any of the following display functions from the View menu to
change the layout and appearance of the Key Mapping Editor, Group view, and Zone view:
• Show Zone Names: Turn on to display zone names on each zone in the Key Mapping
Editor.
• Show Zones from all Selected Groups: Turn on to restrict the display of zones to
selected groups in the Key Mapping Editor and Zone view.
• Show Group Column in Mapping Editor: Turn on to display the group list in the Key
Mapping Editor.