10.6

414Logic Pro Instruments
Use Mapping pane Zone menu Automap commands
Automapping is a process that repositions zones across keyboard and velocity ranges,
based on the audio content of each zone. As examples: note pitch or loudness, or a
filename.
In Logic Pro Sampler, choose any of the following commands or functions from the Zone >
Automap menu:
• Automap using Current Root Note: Selected zones are extended horizontally to fill the
entire key range without gaps between zones, relative to the current root note position.
If multiple selected zones have the same root note, they will be sorted by velocity,
based on audio content loudness levels.
• Automap using Pitch Detection: Selected zones are repositioned and extended
horizontally to fill the entire key range without gaps between zones, in accordance
with their pitch. If multiple selected zones have the same pitch, they will be sorted by
velocity, based on audio content loudness levels.
• Automap using Mapping Data from Audio Files: Selected zones are mapped using any
recognized mapping data contained within the audio file header. Should the content of
audio files overlap, new groups are created and zones are automatically moved to avoid
overlaps.
• Automap using Root Note from Audio File Names: Selected zones are repositioned
and extended horizontally to fill the entire key range without gaps between zones in
accordance with root note data in the audio filename. If multiple selected zones have
the same root note in the filename, they will be sorted by velocity, based on audio
content loudness levels.
• Automap Velocities Only: Selected zones are repositioned and extended vertically to fill
the entire velocity range without gaps between zones, in accordance with audio content
loudness levels.
Use Mapping pane Zone menu Remap commands
Remapping is a process that repositions zones across keyboard and velocity ranges, with
no analysis of audio file content.
In Logic Pro Sampler, choose any of the following commands or functions from the Zone >
Remap menu:
• Fill Gaps: Use to expand the velocity and key ranges of all selected zones that have
gaps between them. Expansion of these ranges is balanced between selected zones.
• Mirror Velocities: Use to change the velocity range positions of all selected zones.
Selected zone positions are mirrored vertically on the key.
• Pivot on Corner: Use to remap selected zones to the position/key of the lowest selected
note. Selected zones are stacked vertically on the key, in order from lowest (at the
bottom) to highest numbered. The velocity range of each stacked zone is automatically
adjusted.
Note: In cases where selected zones are already stacked vertically, Pivot on Corner will
perform the inverse function and will place each zone on a different key, using the full
velocity range available.
• Remap All Notes: Use to remap all selected zones to fill all free keys, starting from the
position/key of the lowest selected zone.