10.6

391Logic Pro Instruments
Target Comments
Pitch Modulates the frequency (pitch) of the loaded sampler instrument. If you
select an LFO as the source, this target leads to siren or vibrato sounds.
Select one of the envelope generators with zero attack, short decay, zero
sustain, and short release as the source for tom and kick drum sounds.
Slight envelope modulations can make the amount of detuning change
over time, which can be particularly useful for brass sounds.
Glide Time Modulates the duration of the Glide (portamento) effect. If you modulate
Glide with Velocity, keystrike speed sets the time required for played notes
to reach the target pitch.
Filter Cutoff Modulates the Cutoff Frequency parameter independently for each filter.
Filter Resonance Modulates the Resonance parameter independently for each filter.
Filter Drive Modulates the filter Drive parameter independently for each filter.
Filter Blend Modulates the Filter Blend parameter which changes the balance between
the filter units. See Crossfade between Sampler filters.
Volume Controls the main output level.
Pan Modulates the panorama position of the sound in the stereo spectrum.
Modulating Pan with an LFO results in a stereo tremolo (auto panning). In
unison mode, the panorama positions of all voices are spread across the
entire stereo spectrum. Nevertheless, you can still modulate pan, moving
the positions in parallel.
LFORate Modulates the LFO frequency (rate). For example, you can automatically
accelerate or slow down the LFO1 Rate by modulating this target with one
of the envelope generators or another LFO.
LFOFade Controls the LFORamp Generator parameter. See Use the Sampler LFO
ramp generator.
LFOPhase Controls the LFO waveform start position.
EnvDelay Modulates the Delay (pre Attack phase) time of the envelope.
EnvAttack Modulates the Attack time of the envelope.
EnvAttack Curve Modulates the Attack curve shape of the envelope.
EnvHold Modulates the Hold time of the envelope.
EnvDecay Modulates the Decay time of the envelope.
EnvRelease Modulates the Release time of the envelope.
Time Scale (lengthen or shorten) the envelope time intervals, based on key
position. Note position C3 is the center point. Time intervals for zones
assigned to keys above C3 can be made shorter with the Amount slider.
Time intervals for zones assigned to keys below C3 can be made longer.
All Env Time Stages Simultaneously modulate all envelope time parameters, as applicable to
the chosen envelope type: Delay, Attack, Hold, Decay, Release.
Hold Modulates the controller assigned to the sustain pedal function.
Articulation ID Modulates the Articulation ID. See Sampler articulation handling.