10.6

251Logic Pro Instruments
Set Logic Pro ES2 Vector Envelope times
With the exception of the first point, which is tied to the beginning of each played note,
every point has a Time parameter. This parameter defines the period of time required for
the position indicator to travel from the point that preceded it. The times are normally
displayed in milliseconds (ms).
Set a Vector Envelope time value
• In Logic Pro, drag the numerical value vertically.
Note: Changing a time value alters the absolute time positions of all subsequent points.
Set a time value without affecting the absolute time positions of later Vector
Envelope points
• In Logic Pro, Control-drag the Time parameter to increase or decrease the time required
to reach the following point.
The time setting of the ensuing point is simultaneously adjusted by a corresponding
amount. This ensures that the adjacent and all following points retain their absolute
time positions.
Logic Pro ES2 Vector Envelope time scaling
You can stretch and compress the entire Vector Envelope, which is faster than modifying
each point. To double the Vector Envelope speed, set Time Scaling to 50%. Set to 200% to
halve the speed.
• The Time Scaling parameter ranges from 10% to 1000%. It is scaled logarithmically.
• If the Loop Rate is “as set,” scaling also affects the loop.
• If the Loop Rate is set to a free or synced value, the setting is not affected by the Time
Scaling parameter.
Normalize Vector Envelope time scaling and the loop rate with Fix Timing
• In Logic Pro, Click Fix Timing to multiply the Time Scaling value by all time parameters.
Time Scaling is reset to 100%.
There is no audible difference. This is simply a normalizing procedure.
In cases where Loop Rate is set to a synced value, clicking Fix Timing switches the Loop
Rate to “as set,” thus preserving the absolute rate.