10.6

211Logic Pro Instruments
Set up a delayed vibrato
1. In Logic Pro, drag the Form slider to the right—toward attack.
2. Select Pitch as the LFO target in the left column of the router.
3. Use the Wave knob to select the triangular wave as the LFO waveform.
4. Drag the Rate field to an LFO rate of about 5Hz.
5. Drag the upper Int via Wheel arrow to a low value, and the lower arrow to 0.
Logic Pro ES1 MIDI controllers
The table outlines the way ES1 responds to MIDI continuous controller numbers (CC).
Controller number Parameter name
12 Oscillator pitch buttons
13 Oscillator waveform
14 Mix slider
15 Waveform of sub-oscillator
16 Drive slider
17 Cutoff slider
18 Resonance slider
19 Slope buttons
20 ADSR via Vel (lower slider)
21 ADSR via Vel (upper slider)
22 Attack slider
23 Decay slider
24 Sustain slider
25 Release slider
26 Key slider
27 Amplifier Envelope Selector buttons
28 Level via Velocity (lower slider)
29 Level via Velocity (upper slider)
30 Chorus parameter
31 Modulation envelope target
102 Modulation envelope form slider
103 Modulation envelope: Int via Vel parameter (lower slider)
104 Modulation envelope: Int via Vel parameter (upper slider)
105 LFO rate