10.6

138Logic Pro Instruments
• Mix knob: Set the wet/dry balance (0% = dry only; 50% = equal mix; 100% = wet only).
• File button: Open a pop-up menu with several useful commands and to access presets.
• Presets: Choose a preset from the submenu.
• Save: Open a dialog where you can name and save the current settings to a new
preset. The saved preset name is shown at the bottom of the Presets submenu list.
• Copy/Paste: Copy the current settings to the Clipboard and paste the Clipboard
contents.
• Clear: Reset all parameter settings to default values.
Alchemy Classic Reverb effect parameters
CPU-efficient reverb.
• File button: Open a pop-up menu with several useful commands and to access presets.
• Presets: Choose a preset from the submenu.
• Save: Open a dialog where you can name and save the current settings to a new
preset. The saved preset name is shown at the bottom of the Presets submenu list.
• Copy/Paste: Copy the current settings to the Clipboard and paste the Clipboard
contents.
• Clear: Reset all parameter settings to default values.
• Pre Delay knob: Set the amount of initial delay before diffuse reflections begin.
• Damping knob: Determine the amount of high frequency loss in the reflections.
• Hi/Lo Cut knobs: Set high and low frequencies. The wet signal above and below is cut.
• Size knob: Determine the dimensions of the simulated space. Larger values equal longer
reverb times.
• Mix knob: Determine the wet/dry balance (0% = dry only; 50% = equal mix; 100% = wet
only).
Alchemy Convolution Reverb effect parameters
A high-quality reverb effect that uses recordings of actual acoustic spaces, such as caves,
tunnels, halls, and so on. These recordings are known as impulse responses. You can apply
an impulse response to your Alchemy preset which makes it sound like it is being played in
the chosen acoustic space.
• Dry knob: Set the level of the dry signal sent to the main outputs.
• Wet knob: Set the level of the effect signal sent to the main outputs.
• PreDelay knob: Set the amount of initial delay before diffuse reflections begin.
• Size knob: Determine the dimensions of the simulated space. Larger values equal longer
reverb times.
• Stereo knob: Set the output width of the convolution. When set to 100%, the output
width is dictated by the impulse response sample. When set to 0%, it is equivalent to
convolving with a mono version of the stereo impulse.
• Start knob: Determine the start point of the loaded impulse response.
• End knob: Determine the end point of the loaded impulse response.