X

Chapter 2 Delay eects 63
Edit parameters in the Tap display
You can graphically edit any tap parameter that is represented as a vertical line in
Delay Designer’s Tap display. The Tap display is ideal if you want to edit the parameters of one
tap relative to other taps or when you need to edit or align multiple taps simultaneously.
Edit a tap parameter in the Tap display
1 Click the view button of the parameter you want to edit.
2 Vertically drag the bright line of the tap you want to edit (or one of the selected taps, if multiple
taps are selected).
If you selected multiple taps, the values of all selected taps are changed relative to each other.
Note: The method outlined above is slightly dierent for the Filter Cuto and Pan parameters.
See the tasks below.
Set the values of multiple taps
m Command-drag horizontally and vertically across several taps in the Tap display.
Parameter values change to match the pointer position as you drag across the taps. Command-
dragging across several taps lets you draw value curves, much like using a pencil to create a
curved line on a piece of paper.