X

Chapter 1 Amps and pedals 40
Use Pedalboard’s import mode
Pedalboard has a feature you can use to import parameter settings for each type of pedal. In
contrast to the plug-in window Settings pop-up menu, which you use to load a setting for the
entire Pedalboard plug-in, this feature can be used to load a setting for a specic stompbox type.
Turn import mode on or o
m Click the Import Mode button to show all pedals used in the most recent Pedalboard setting.
When the Import Mode button is active, the Pedal Browser switches to an alternate view mode
that displays imported settings. When import mode is inactive, the normal Pedal Browser view
is shown.
Import pedal settings into the Pedal Browser
1 Click the Import Mode button to activate import mode.
Note that the View menu changes to the Select Setting button.
Note: If this is your rst attempt to import settings, a dialog opens where you can select a setting
to import.
2 Click the Select Setting button and select a setting, then click Open.
Depending on the setting you chose, one or more stompboxes appear in the Pedal Browser. The
name of the imported setting is shown at the bottom of the Pedal Browser.
Add an imported pedal to the Pedal area
Do one of the following:
m Drag the stompbox that you want to add from the Pedal Browser to the appropriate Pedal area
position. This can be to the left, to the right, or in between existing pedals.
m Make sure that no pedal is selected in the Pedal area, then double-click a stompbox in the Pedal
Browser to add it to the right of all existing eects in the Pedal area.
Note: The parameter settings of pedals added in import mode are also imported.