X

Chapter 13 Space Designer convolution reverb 244
Space Designer button bar
The button bar is used to switch the main display and parameter bar between envelope
and EQ views. It also includes buttons that reset the envelopes and EQ or reverse the
impulse response.
Button bar parameters
•
Reset button: Click to reset the currently displayed envelope or EQ to default values.
•
All button: Click to reset all envelopes and the EQ to default values.
•
Volume Env button: Click to show the volume envelope in the foreground of the main
display. The other envelope curves are shown as transparencies in the background. See
Space Designer volume envelope on page 246.
•
Filter Env button: Click to show the lter envelope in the foreground of the main display. The
other envelope curves are shown as transparencies in the background. See Space Designer
lter parameters on page 250.
•
Density Env button: Click to show the density envelope in the foreground of the main display.
The other envelope curves are shown as transparencies in the background. See Use impulse
responses on page 240.
•
EQ button: Click to show the four-band parametric EQ in the main display. See Use
Space Designer EQ parameters on page 248.
•
Reverse button: Click to reverse the impulse response and envelopes. When the impulse
response is reversed, you are eectively using the tail rather than the front end of the sample.
You may need to change the Pre-Dly and other parameter values when reversing.