X

Chapter 13 Space Designer convolution reverb 239
Space Designer interface
The Space Designer interface consists of the following main sections:
Global
parameters
Filter parameters
Main display
Global
parameters
Button bar
Impulse
response
parameters
Parameter bar
Envelope and
EQ parameters
•
Impulse response parameters: Use to load, save, or manipulate recorded or synthesized impulse
response les. The chosen impulse response le determines what Space Designer will use to
convolve with your audio signal. See Use impulse responses on page 240.
•
Envelope and EQ parameters: Use the view buttons in the button bar to switch the main
display and parameter bar between envelope and EQ views. Use the main display to edit the
displayed parameters graphically, and use the parameter bar to edit them numerically. See
Space Designer envelopes and EQ overview on page 243.
•
Filter parameters: Use to modify the timbre of the Space Designer reverb. You can choose from
several lter modes, adjust resonance, and also adjust the lter envelope dynamically over
time. See Space Designer lter parameters on page 250.
•
Global parameters: After your impulse response is loaded, use these parameters to determine
how Space Designer operates on the overall signal and impulse response. Included are
input and output parameters, delay and volume compensation, predelay, and so on. See
Space Designer global parameters overview on page 252.