X

Chapter 10 Modulation eects 217
Spreader
Spreader widens the stereo spectrum of a signal by periodically shifting the frequency range of
the original signal, thus changing the perceived width of the signal. You can also use Spreader to
specify the delay between channels in samples, which adds to the perceived width and channel
separation of a stereo input signal.
Spreader parameters
•
Intensity slider and eld: Drag to determine the modulation amount.
•
Speed knob and eld: Rotate to set the speed of the built-in LFO.
•
Channel Delay slider and eld: Drag to set the delay time in samples.
•
Mix slider and eld: Drag to determine the balance between the eect and input signals.