X

Chapter 8 Metering tools 157
Surround MultiMeter Peak parameters
The Surround MultiMeter oers the following Peak parameters:
Surround MultiMeter Peak parameters
•
Hold button: Click to turn on peak hold for all metering tools in Surround MultiMeter, as
follows:
•
Analyzer: A small yellow segment above each level bar indicates the most recent peak level.
•
Goniometer: All illuminated pixels are held during a peak hold.
•
Level Meter: A small yellow segment above each level bar indicates the most recent peak
level.
•
Balance/Correlation Meter: The horizontal area around the white correlation indicator denotes
phase correlation deviations in real time, in both directions.
Note: This meter must be manually opened by clicking the Balance/Correlation button.
•
Hold Time pop-up menu: Choose the hold time for all metering tools. Choose 2, 4, or 6
seconds—or innite.
Note: The (peak) Hold button must be turned on for the selected time value to have an eect.
•
Reset button: Click to reset the peak hold segments of all metering tools.
•
Inter Sample Peak Detection checkbox (Extended Parameters area): Select to detect inter-sample
peaks in the signal.