X

Chapter 6 Filter eects 13 8
Fuzz-Wah Compressor parameters
The Compressor eect is normally used just before the Fuzz (distortion) eect. This allows you to
increase or decrease the perceived gain, thus providing a suitable input level to the distortion
circuit. You can, however, place the Compressor at any position in the eects chain or can disable
it completely.
Compressor eect parameters
•
On/o button: Turns the Compressor eect on or o.
•
Ratio knob: Rotate to adjust the compression slope. The additional gain oered by
the compression circuit—when directly preceding the Fuzz eect—lets you create
crunchy distortions.
Fuzz parameters
These parameters control the integrated distortion circuit.
Fuzz parameters
•
On/o button: Turns the Fuzz distortion eect on or o.
•
Fuzz Gain knob:Rotate to set the level of distortion.
•
Fuzz Tone knob:Rotate to adjust the tonal color of the distortion. Low settings tend to be
warmer, and high settings are brighter and harsher.