X

Chapter 1 Amps and pedals 12
Switch between the full and small versions of the interface
m Click the disclosure triangle between the Cabinet and Mic pop-up menus in the full interface to
switch to the smaller version.
In the small interface you can access all parameters except microphone selection
and positioning.
m To switch back to the full interface, click the disclosure triangle beside the Output eld in the
small interface.
Click here in
full interface.
Click here in
small interface.
Choose an Amp Designer model
You can use the Model pop-up menu to choose a precongured model, or you can build
a customized model using the Amp, Cabinet, and Mic pop-up menus. See Build a custom
Amp Designer combo. Your choices remain visible in the pop-up menus and they are also
illustrated in the visual display above them. For example, if you choose Tweed 4X10 from the
Cabinet pop-up menu, you see the Tweed cabinet with four 10" speakers on the right side of
the display.
m Choose a precongured model, consisting of an amplier, a cabinet, an EQ type, and a
microphone type, from the Model pop-up menu.