10.6

62Logic Pro Effects
Edit taps with shortcut menu commands
• In Logic Pro, Control-click (or right-click) a tap in the Tap display, then choose one
of the following commands from the shortcut menu:
• Copy sound parameters: Copies all parameters (except the delay time) of the
selected tap or taps to the Clipboard.
• Paste sound parameters: Pastes the tap parameters from the Clipboard into the
selected tap or taps. If there are more taps in the Clipboard than are selected in the
Tap display, the extra taps in the Clipboard are ignored.
• Reset sound parameters to default values: Resets all parameters of all selected taps
(except the delay time) to the default values.
• 2 x delay time: Doubles the delay time of all selected taps. For example, the delay
times of three taps are set as follows: Tap A = 250 ms, Tap B = 500 ms, and Tap C
= 750 ms. If you select these three taps and choose “2 x delay time,” the taps are
changed as follows: Tap A = 500 ms, Tap B = 1000 ms, and Tap C = 1500 ms. In
other words, a rhythmic delay pattern unfolds half as fast. (In musical terms, it is
played in half time.)
• 1/2 x delay time: Halves the delay time of all selected taps. Using the example above,
choosing “1/2 x delay time” changes the taps as follows: Tap A = 125 ms, Tap
B = 250 ms, and Tap C = 375 ms. In other words, a rhythmic delay pattern
unfolds twice as fast. (In musical terms, it is played in double time.)
• Delete tap(s): Deletes all selected taps.
Logic Pro Delay Designer Tap parameter bar
The Tap parameter bar provides access to all parameters of the selected tap. It also shows
several parameters that are not available in the Tap display, such as Transpose and Flip.
Editing the parameters of a single, selected tap is fast and precise because all parameters
are visible, with no need to switch display views or estimate values with vertical lines. If
you choose multiple taps in the Tap display, the values of all selected taps are changed
relative to each other.
Option-click a parameter value to reset it to the default setting. If multiple taps are
selected, Option-clicking a parameter of any tap resets all selected taps to the default
value for that parameter.