10.6

44Logic Pro Effects
Logic Pro Pedalboard modulation pedals
This table describes the modulation effects pedals.
Stompbox Description
Flange Factory A deluxe flanging effect with precise sound control.
• On/Off switch: Enable/disable the pedal.
• Rate knob: Set the modulation speed in hertz, or synchronized with the
host tempo when you enable the Sync button.
• Sync button: Turn on to synchronize with the host tempo.
• Depth knob: Set the strength of the effect.
• Reso knob: Determine the amount of cutoff frequency resonance.
• Mix knob: Set the level ratio between the flanging and source signals.
• Wave knob: Switch between modulation waveforms.
• Symmetry knob: Alter the shape of the modulation waveform.
• Curve knob: Smooth the waveform shape.
• Low knob: Set the low frequency cutoff.
• High knob: Set the high frequency cutoff.
Heavenly Chorus A rich, sweet-sounding chorus effect that thickens the sound.
• On/Off switch: Enable/disable the pedal.
• Rate knob: Set the modulation speed in hertz, or synchronized with the
host tempo when you enable the Sync button.
• Sync button: Turn on to synchronize with the host tempo.
• Depth knob: Set the strength of the effect.
• Feedback knob: Set the amount of effect output sent to the effect
input, thickening the sound or leading to intermodulations.
• Delay knob: Set the ratio between the original and effect signals.
• Bright switch: Set at the top position to apply a fixed frequency internal
EQ. Bottom position bypasses the EQ.
Phase Tripper A simple phasing effect.
• On/Off switch: Enable/disable the pedal.
• Rate knob: Set the modulation speed in hertz, or synchronized with the
host tempo when you enable the Sync button.
• Sync button: Turn on to synchronize with the host tempo.
• Depth knob: Set the strength of the effect.
• Feedback knob: Set the amount of effect output sent to the effect
input, changing the tonal color, making the sweeping effect more
pronounced, or both.
Phaze 2 A flexible dual-phaser effect.
• On/Off switch: Enable/disable the pedal.
• LFO 1/2 Rate knobs: Set the modulation speed in hertz, or synchronized
with the host tempo when you enable the Sync button.
• Sync button: Turn on to synchronize with the host tempo.
• Ceiling/Floor knobs: Determine the frequency range that is swept.
• Order knobs: Switch between algorithms, with higher (even) numbers
resulting in a heavier phasing effect. Odd order numbers result in more
subtle comb-filtering effects.
• Feedback knobs: Set the amount of effect output sent to the effect
input, changing the tonal color, making the phasing effect more
pronounced, or both.
• Tone knobs: Rotate left to increase the amount of lowpass filtering.
Rotate right to increase the amount of highpass filtering.
• Mix knob: Set the level ratio between each phaser.