10.6

36Logic Pro Effects
Add a stompbox to the Pedal area
In Logic Pro, do one of the following:
• Drag the effect that you want to insert from the Pedal Browser to the appropriate Pedal
area position. This can be to the left, to the right, or in between existing pedals.
• Double-click an effect in the Pedal Browser to add it to the right of all existing
stompboxes in the Pedal area.
Note: Double-clicking a stompbox in the Pedal Browser when a stompbox is selected in
the Pedal area replaces the selected pedal.
Use Logic Pro Pedalboard import mode
Pedalboard has a feature you can use to import parameter settings for each type of pedal.
In contrast to the plug-in window Settings pop-up menu, which you use to load a setting
for the entire Pedalboard plug-in, this feature can be used to load a setting for a specific
stompbox type.
Turn import mode on or off
• Import Mode button: In Logic Pro, show all pedals used in the most recent Pedalboard
setting. When the Import Mode button is active, the Pedal Browser switches to an
alternate view mode that displays imported settings. When import mode is inactive,
the normal Pedal Browser view is shown.
Import pedal settings into the Pedal Browser
1. In Logic Pro, click the Import Mode button to activate import mode.
Note that the View menu changes to the Select Setting button.
Note: If this is your first attempt to import settings, a dialog opens where you can
select a setting to import.
2. Select Setting button: Select a setting, then click Open. One or more stompboxes
appear in the Pedal Browser.
The name of the imported setting is shown at the bottom of the Pedal Browser.