10.6

318Logic Pro Effects
DeEsser Detector parameters
• Frequency knob and field: Set the frequency range for analysis.
• Sensitivity knob and field: Set the degree of responsiveness to the input signal.
• Monitor pop-up menu: Choose the signal you want to monitor and adjust.
• Det(ector): Choose to monitor the isolated detector signal and to set the
frequency range.
• Sup(pressor): Choose to monitor the filtered suppressor signal and to set the
frequency range.
• Sens(itivity): Choose to remove the sound from the input signal in response to
the Sensitivity parameter.
• Off: Choose to hear the DeEsser output.
• Detector Display: Shows the frequency range for detection.
DeEsser Suppressor parameters
• Frequency knob and field: Set the frequency range for reduction.
• Strength knob and field: Set the amount of gain reduction for signals that surround
the specified frequency.
• Activity LED: Indicates active suppression in real time.
• Suppressor Display: Shows the frequency range for suppression.
DeEsser common parameter
• Smoothing slider and field: Set the reaction speed for the gain reduction start and
end phases. Smoothing controls both the attack and release times.
Denoiser
Logic Pro Legacy Denoiser overview
Denoiser eliminates or reduces any noise below a threshold volume level. It does this by
using Fast Fourier Transform (FFT) analysis to identify frequency bands of lower volume
and less complex harmonic structure, which it then reduces to the defined decibel level.
If you use Denoiser too aggressively, you may encounter artifacts that are less pleasant
than the existing noise. Use the three Smoothing knobs to reduce or eliminate these
artifacts. See Logic Pro Legacy Denoiser smoothing controls.