10.6

278Logic Pro Effects
• Band 4 On/Off button: Switch on a high parametric filter with three controls. Frequency
sets a center frequency. Q sets the width of the frequency band around the center
frequency. Gain sets the level of the band. When active, you can change band
parameters directly in the graphic display.
• Band 4 background or dot: Drag the blue shaded area or dot horizontally to change
the frequency and drag vertically to change the gain value. Option-click to reset to
default values. Hold Option-Command then drag vertically to change the Q value.
• Band 5 On/Off button: Switch on a high shelving filter that adjusts the level of high
frequencies and has a minimal impact on frequencies below the cutoff (set) frequency.
When active, you can change band parameters directly in the graphic display.
• Band 5 background or dot: Drag the purple shaded area or dot horizontally to
change the frequency and drag vertically to change the gain value. Option-click
to reset to default values. Hold Option-Command then drag vertically to change
the Q value.
• Band 6 On/Off button: Switch on a lowpass filter that allows low frequencies to pass
and reduces the level of high frequencies near the cutoff (set) frequency. When active,
you can change band parameters directly in the graphic display.
• Band 6 background or dot: Drag the pink shaded area to change the frequency value.
Drag the pink dot horizontally to change the frequency and drag vertically to change
the gain value. Option-click to reset to default values. Hold Option-Command then
drag vertically to change the Q value.
• Frequency field: Set the frequency of the selected EQ band.
• Gain field: Set the level of the selected EQ band (bands 2 to 5).
• Order field: Set the order (filter slope) for band 1 or band 6.
• Q field: Set the band width surrounding the frequency of the selected EQ band.
Logic Pro ChromaVerb details window controls
The details window contains advanced parameters and shows the built-in six band
Output EQ.
The main window contains the main window controls and shows a Damping EQ overlay
in the graphic display. Click the Main or Details buttons at the upper right to switch
between windows.
ChromaVerb details window control parameters
• Quality pop-up menu: Choose a quality level. Low produces a grainy reverb
with noisy modulation. High sounds clean and precise. Ultra delivers a smooth,
expensive-sounding reverb.
• Mod Speed slider and field: Set the speed of the built in LFO.
• Mod Depth slider and field: Set the depth of LFO modulation. The range is determined
by the chosen room type.