10.6
Table Of Contents
- Contents
- Logic Pro Effects
- Amps and pedals
- Logic Pro Amps and Pedals overview
- Amp Designer
- Logic Pro Amp Designer overview
- Logic Pro Amp Designer models
- Logic Pro Amp Designer cabinets
- Build a custom Logic Pro Amp Designer combo
- Logic Pro Amp Designer amplifier controls
- Logic Pro Amp Designer EQ overview
- Logic Pro Amp Designer effects overview
- Logic Pro Amp Designer reverb effect
- Logic Pro Amp Designer tremolo and vibrato
- Logic Pro Amp Designer microphone parameters
- Bass Amp Designer
- Logic Pro Bass Amp Designer overview
- Logic Pro Bass Amp Designer amplifier models
- Logic Pro Bass Amp Designer cabinet models
- Build a Logic Pro Bass Amp Designer combo
- Logic Pro Bass Amp Designer signal flow
- Logic Pro Bass Amp Designer Pre-amp flow
- Use the Logic Pro Bass Amp Designer D.I. box
- Logic Pro Bass Amp Designer amplifier controls
- Logic Pro Bass Amp Designer effects overview
- Logic Pro Bass Amp Designer EQ
- Logic Pro Bass Amp Designer compressor
- Logic Pro Bass Amp Designer Graphic EQ
- Logic Pro Bass Amp Designer Parametric EQ
- Logic Pro Bass Amp Designer mic parameters
- Pedalboard
- Logic Pro Pedalboard overview
- Use the Logic Pro Pedalboard Browser
- Use Logic Pro Pedalboard import mode
- Use the Logic Pro Pedalboard Pedal area
- Use the Logic Pro Pedalboard Router
- Use Logic Pro Pedalboard Macro Controls
- Logic Pro Pedalboard distortion pedals
- Logic Pro Pedalboard pitch pedals
- Logic Pro Pedalboard modulation pedals
- Logic Pro Pedalboard delay pedals
- Logic Pro Pedalboard filter pedals
- Logic Pro Pedalboard dynamics pedals
- Logic Pro Pedalboard utility pedals
- Delay effects
- Logic Pro Delay effects overview
- Delay Designer
- Logic Pro Delay Designer overview
- Logic Pro Delay Designer main display
- Use the Logic Pro Delay Designer Tap display
- Create Logic Pro Delay Designer taps
- Edit Logic Pro Delay Designer taps
- Edit in the Logic Pro Delay Designer Tap display
- Logic Pro Delay Designer Tap parameter bar
- Use Logic Pro Delay Designer sync mode
- Logic Pro Delay Designer master parameters
- Use Logic Pro Delay Designer in surround
- Logic Pro Echo
- Logic Pro Sample Delay
- Logic Pro Stereo Delay
- Logic Pro Tape Delay
- Distortion effects
- Dynamics processors
- Logic Pro Dynamics processors overview
- Logic Pro Adaptive Limiter
- Compressor
- Logic Pro DeEsser 2
- Logic Pro Enveloper
- Logic Pro Expander
- Logic Pro Limiter
- Multipressor
- Noise Gate
- Surround Compressor
- Equalizers
- Filter effects
- Logic Pro Filter effects overview
- AutoFilter
- EVOC 20 Filterbank
- EVOC 20 TrackOscillator
- Logic Pro EVOC 20 TrackOscillator overview
- Vocoder overview
- Logic Pro EVOC 20 TrackOscillator interface
- Logic Pro EVOC 20 TrackOscillator analysis in controls
- Logic Pro EVOC 20 TrackOscillator U/V detection controls
- Logic Pro EVOC 20 TrackOscillator Synthesis in controls
- Logic Pro EVOC 20 TrackOscillator oscillator controls
- Logic Pro EVOC 20 TrackOscillator oscillator pitch controls
- Logic Pro EVOC 20 TrackOscillator formant filter
- Logic Pro EVOC 20 TrackOscillator modulation
- Logic Pro EVOC 20 TrackOscillator output controls
- Fuzz-Wah
- Spectral Gate
- Imaging processors
- Metering tools
- Logic Pro Metering tools overview
- Logic Pro BPM Counter
- Logic Pro Correlation Meter
- Logic Pro Level Meter
- Logic Pro Loudness Meter
- MultiMeter
- Surround MultiMeter
- Logic Pro Tuner utility and plug-in
- MIDI plug-ins
- Use MIDI plug-ins in Logic Pro
- Arpeggiator MIDI plug-in
- Logic Pro Arpeggiator MIDI plug-in overview
- Logic Pro Arpeggiator MIDI plug-in control parameters
- Logic Pro Arpeggiator MIDI plug-in note order parameters
- Logic Pro Arpeggiator MIDI plug-in note order variations
- Logic Pro Arpeggiator MIDI plug-in note order inversions
- Logic Pro Arpeggiator MIDI plug-in pattern parameters
- Logic Pro Arpeggiator MIDI plug-in Live mode
- Logic Pro Arpeggiator MIDI plug-in Grid mode
- Logic Pro Arpeggiator MIDI plug-in options parameters
- Logic Pro Arpeggiator MIDI plug-in keyboard parameters
- Use Logic Pro Arpeggiator MIDI plug-in keyboard parameters
- Assign Logic Pro Arpeggiator controllers
- Chord Trigger MIDI plug-in
- Logic Pro Modifier MIDI plug-in
- Modulator MIDI plug-in
- Logic Pro Note Repeater MIDI plug-in
- Logic Pro Randomizer MIDI plug-in
- Scripter MIDI plug-in
- Use the Logic Pro Scripter MIDI plug-in
- Use the Logic Pro Scripter MIDI plug-in Script Editor
- Logic Pro Scripter MIDI plug-in API overview
- Logic Pro Scripter MIDI plug-in MIDI processing functions
- Logic Pro Scripter MIDI plug-in HandleMIDI function
- Logic Pro Scripter MIDI plug-in ProcessMIDI function
- Logic Pro Scripter MIDI plug-in GetParameter function
- Logic Pro Scripter MIDI plug-in SetParameter function
- Logic Pro Scripter MIDI plug-in ParameterChanged function
- Logic Pro Scripter MIDI plug-in Reset function
- JavaScript objects overview
- Use the JavaScript Event object
- Use the JavaScript TimingInfo object
- Use the Trace object
- Use the MIDI event beatPos property
- Use the JavaScript MIDI object
- Create Logic Pro Scripter MIDI plug-in controls
- Logic Pro Transposer MIDI plug-in
- Velocity Processor MIDI plug-in
- Modulation effects
- Logic Pro Modulation effects overview
- Logic Pro Chorus effect
- Logic Pro Ensemble effect
- Logic Pro Flanger effect
- Logic Pro Microphaser
- Logic Pro Modulation Delay
- Logic Pro Phaser effect
- Ringshifter
- Rotor Cabinet effect
- Logic Pro Scanner Vibrato effect
- Logic Pro Spreader
- Logic Pro Tremolo effect
- Multi Effects
- Logic Pro Multi Effects overview
- Phat FX
- Step FX
- Logic Pro Remix FX
- Pitch effects
- Reverb effects
- Logic Pro Reverb effects overview
- ChromaVerb
- Logic Pro EnVerb
- Logic Pro SilverVerb
- Space Designer convolution reverb
- Logic Pro Space Designer overview
- Logic Pro Space Designer interface
- Use impulse responses in Logic Pro
- Space Designer envelopes and EQ
- Space Designer global parameters
- Specialized effects
- Utilities and tools
- Legacy effects
- Logic Pro Legacy effects overview
- Logic Pro Legacy AVerb
- Logic Pro Legacy Bass Amp
- Logic Pro Legacy DeEsser
- Denoiser
- Logic Pro Legacy Ducker
- EQ
- GoldVerb
- Logic Pro Legacy Grooveshifter
- Guitar Amp Pro
- Logic Pro Legacy Guitar Amp Pro overview
- Logic Pro Legacy Guitar Amp Pro amplifier models
- Logic Pro Legacy Guitar Amp Pro cabinet models
- Logic Pro Legacy Guitar Amp Pro EQ
- Logic Pro Legacy Guitar Amp Pro amplifier controls
- Logic Pro Legacy Guitar Amp Pro effects
- Logic Pro Legacy Guitar Amp Pro mic parameters
- PlatinumVerb
- Logic Pro Legacy Silver Compressor
- Logic Pro Legacy Silver Gate
- Logic Pro Legacy Speech Enhancer
277Logic Pro Effects
Logic Pro ChromaVerb Output EQ
The details window contains advanced parameters and shows the built-in six band
Output equalizer.
The main window contains the main window controls and shows a Damping EQ overlay in
the graphic display. Click the Main or Details buttons at the upper right to switch between
windows.
ChromaVerb Output EQ parameters
• Output EQ on/off button: Turn on to enable the Output EQ, which adjusts frequencies of
the overall combined reverb and source signal.
• Main/Details button: Switch between the main window and the details window.
• Graphic display: Shows the six band output EQ curve which you can interact directly
with in the display or with the fields below it.
• Band 1 On/Off button: Switch on a highpass filter that allows high frequencies to pass
and reduces the level of low frequencies near the cutoff (set) frequency. When active,
you can change band parameters directly in the graphic display.
• Band 1 background or dot: Drag the red shaded area horizontally to change the
frequency value. Drag the red dot horizontally to change the frequency and drag
vertically to change the Q value. Option-click to reset to default values. Hold
Option-Command then drag vertically to change the Q value.
• Band 2 On/Off button: Switch on a low shelving filter that adjusts the level of low
frequencies and has a minimal impact on frequencies above the cutoff (set) frequency.
When active, you can change band parameters directly in the graphic display.
• Band 2 background or dot: Drag the orange shaded area or dot horizontally to
change the frequency and drag vertically to change the gain value. Option-click
to reset to default values. Hold Option-Command then drag vertically to change
the Q value.
• Band 3 On/Off button: Switch on a low parametric filter with three controls. Frequency
sets a center frequency. Q sets the width of the frequency band around the center
frequency. Gain sets the level of the band. When active, you can change band
parameters directly in the graphic display.
• Band 3 background or dot: Drag the green shaded area or dot horizontally to change
the frequency and drag vertically to change the gain value. Option-click to reset to
default values. Hold Option-Command then drag vertically to change the Q value.