10.6

261Logic Pro Effects
• Wobble: Modulates the audio signal through a vintage-style filter effect. X sets the
modulation rate and Y sets the modulation depth. Click the Settings button
to
access the following additional parameter:
Time: Select from options for note division, note division with an added triplet, or a
triplet of the note division.
• Orbit: Modulates the audio signal through a flanger effect, phaser effect, or a mix of
both. X sets the modulation rate and Y sets the modulation depth. Click the Settings
button
to access the following additional parameter:
Mode: Choose between a phaser effect, a modulation effect that is a mix of both a
phaser and flanger, or a flanger effect.
• Repeater: Creates a stuttering effect. X sets the repeat rate and Y sets the mix amount.
Click the Settings button
to access the following additional parameter:
Time: Select from options for note division, note division with an added triplet, or a
triplet of the note division.
• Reverb: Adds ambience to your audio signal. X sets the reverb time and Y sets the mix
amount. Click the Settings button
to access the following additional parameter:
Color: Choose the character for the reverb. Dark rolls off the higher frequencies.
Medium offers a relatively neutral ambience. Bright rolls off the lower frequencies.
• Delay: Adds echoes to your audio signal. X sets the modulation rate and Y
sets the feedback depth. Click the Settings button
to access the following
additional parameter:
Time: Select from options for note division, note division with an added triplet, or a
triplet of the note division.
Remix FX parameters
• FX Lock button: Freezes the effect at the current X/Y values when the pointer is
removed from the pad. When an XY pad is locked, you can then choose a different
XY effect for the same pad and use it in combination with the locked effect. You
can’t choose the same effect for both XY Pads.
• Reset button: Immediately halts all XY pad effects and disables XY pad locks, if active.
• Gater slider: Applies a gate-style effect on the incoming signal. Click the Settings
button to access the following additional parameters:
Gater: Select from options for note division, note division with an added triplet, or a
triplet of the note division.
Noise: Injects a small amount of soft, noninvasive noise into your signal, so that even
without any audio signal you can still hear some gating.
• Downsampler slider: Changes the resolution of incoming audio, making the sound
thinner, gritty, or peaky, similar to Bitcrusher distortion. Click the Settings button
to access the following additional parameter:
Downsampler: Extreme introduces a sympathetic, ringing frequency to your audio signal.
Classic downsamples the audio to “roughen it up.”
• Reverse button: Reverses playback of incoming audio. Touch-sensitive effect
variations are available on the left and right sides of the button. Click the Settings
button
to access the following additional parameter: