10.6

201Logic Pro Effects
Logic Pro Note Repeater MIDI plug-in
This plug-in mimics an audio delay by generating repeating MIDI notes.
Note Repeater parameters
• Input Thru button: Turn on to pass incoming MIDI note events to the output in addition
to the delayed note events. Turn off to send only the delayed notes to the output.
• Delay Sync button: Synchronize the plug-in with the project tempo. Set the delay time
with the Delay slider.
• Delay slider and field: Set the delay time in milliseconds or in bar/beat values when the
Delay Sync button is on.
Note: When the Delay Sync button is on, only bar and beat values are available.
• Display: Shows the unprocessed input MIDI note (bright bar) and delayed MIDI notes.
The height of the bars represents the velocity of each delayed MIDI note.
• Repeats knob: Set the number of delay repetitions.
• Transpose knob: Transpose each delay repeat by the set amount.
• Velocity Ramp knob: Scale the velocity level of each delay repeat by the set amount.
• Note Range Min and Max sliders (extended parameter): Click the disclosure triangle at
the lower left to open the extended parameters. Move the sliders to set an input note
range. Notes that fall within this range are processed (default range: 1–127). Notes
outside the range are not processed.
Note: You can position the Note Range Min slider above the Note Range Max slider and
vice versa, which inverts the input note range behavior: note events that fall within the
range are not processed and note events outside the range are processed.