10.6

199Logic Pro Effects
• Offset slider: Set a positive or negative offset in order to tailor the output for the
intended target.
• Oscilloscope: Displays the shape of the LFO control signal before it is scaled.
• MIDI Channel pop-up menu (extended parameter): Click the disclosure triangle at the
lower left. Choose a MIDI output channel.
Assign a MIDI event to a plug-in parameter
You can assign and send MIDI events to plug-ins in the same channel strip, allowing you to
control parameters without using MIDI CC messages.
1. In Logic Pro, choose Learn Plug-in Parameter from the To pop-up menu.
2. Click the parameter in the target plug-in.
The name of the plug-in and parameter are shown in the To field.
Logic Pro Modulator MIDI plug-in envelope
Modulator Envelope parameters
• Envelope on/off button: Turn the envelope on or off.
• Envelope display: Shows the current envelope shape. Drag the handles in the display to
set the following parameters:
• Delay: Delay the onset of the envelope. Ranges from 0 to 10 seconds.
• Attack: Set the time required to reach the sustain level. Ranges from 0 to 10 seconds.
• Hold: Set the sustain level and duration. Ranges from 0 to 10 seconds.
• Release: Set the time required for the envelope to fall to a value of zero after the
sustain phase of the envelope has finished. Ranges from 0 to 10 seconds.