10.6

71Logic Pro User Guide
• Region inspector: View and edit playback parameters, including transposition and
quantization, for selected regions. Region parameters affect the playback of regions,
but don’t alter the data in the region itself. If you change region parameters while the
project is playing, you hear the changes immediately.
• Track inspector: View and edit various track parameters, including transposition,
velocity, and delay. All regions on the track are affected by the track parameters.
• Inspector channel strips: The left channel strip is the channel strip for the selected
track. The right channel strip shows the output for the left channel strip by default,
but can also show an aux used by the left channel strip (if one exists). You can adjust
the level, pan, sends, and inserts, change effects, and control audio routing for these
channel strips without opening the Mixer.
Inspectors for other working areas, such as the Event inspector, Display Parameters
inspector, and Score inspector are described in their respective chapters.
Open the inspector
Do one of the following:
Click the Inspector button
in the control bar.
Choose View > Show Inspector (or press I).
Open the Region inspector as a separate window
PressOption-R.
Logic Pro Mixer interface
The Mixer shows the channel strips for every track in your project, including auxiliary and
output channel strips, and the master channel strip. This makes it easy to see and adjust
relative levels and pan (balance) positions. You can also add effects, mute and solo tracks, use
busses and sends to control the signal flow, and use groups to control multiple channel strips.