10.6

657Logic Pro User Guide
Change the resolution of the position and length values
You can change the resolution shown for position and length values from the View menu, or
from the shortcut menu in the Cell inspector.
1. In Logic Pro, do one of the following:
• Choose View > Live Loops: Position and Length Resolution from the Tracks area
menu bar.
• Control-click anywhere inside the Cell inspector.
2. Choose one of the following from the menu:
• Bars Only: View the position and length value for cells as bars.
• Bars and Beats: View the position and length value for cells as bars and beats.
• Bars, Beats, and Division: View the position and length value for cells as bars, beats,
and division.
• Bars, Beats, Division, and Ticks: View the position and length value for cells as bars,
beats, division, and ticks.
How the Live Loops grid and Tracks area interact in
Logic Pro
On each track in Logic Pro, you can listen to either a cell in the Live Loops grid or a region
in the Tracks area—never both simultaneously. When you start a cell, any regions on
the same track become inactive. When you stop a cell, the regions are not immediately
reactivated; you need to use buttons in the Divider column or key commands to do this.
You can also pause cells and activate regions on the same track simultaneously. The
Divider column shows circular indicators next to tracks where cells are playing. When
cells are stopped, the Track Activation buttons in the Divider column indicate with a solid
arrow whether the cells or regions are activated. If you have a combination of tracks with
activated cells and regions, both arrows of the Track Activation button are hollow.