10.6

650Logic Pro User Guide
• Select the cell you want to record to, then choose a setting from the Rec-Length
pop-up menu in the Cell inspector.
• Control-click the cell you want to record to, choose Recording > Rec-Length, then
choose a setting from the submenu.
Set the At Rec-End action
The At Rec-End action determines what happens at the end of a recording pass. Depending
on how you set this up, it can be useful for recording multiple takes of a performance, or
for merging multiple performances when recording a software instrument. You can choose
either of the following settings:
• Change to Play Mode: At the end of the recording, Live Loops stops recording and the
cell immediately begins playing the performance you just recorded.
• Continue Recording: At the end of the recording, Live Loops continues recording and
overwrites the previous recording, creates takes, or merges each subsequent recording,
depending on the recording parameter. When Continue Recording is selected and the
Rec-Length parameter is set to Automatic, a Plus button (+) is visible in the middle
of the cell while the cell is recording. Clicking the button sets the Rec-Length to the
nearest bar or beat and starts the next recording pass.
In Logic Pro, do either of the following:
• Select the cell you want to record to, then choose a setting from the At Rec-End
pop-up menu in the Cell inspector.
• Control-click the cell you want to record to, choose Recording > Rec-End Action,
then choose a setting from the submenu.