10.6

Table Of Contents
573Logic Pro User Guide
Pre Fader: The signal is sent before the fader and Pan knob; the send signal is not
affected by volume or pan adjustments. When a send is Pre Fader the Send knob
moves to the left of the Send pop-up menu, and the Send knob ring is blue.
Adjust panning for sends independently in Logic Pro
Sometimes you may want to adjust the stereo pan that a send is routing to an aux
separately from the panning of the channel strip. For example, you may want a stereo
channel strip to send to a surround aux, or you may be using sends to create a headphone
mix and want separate pan positions for the headphone mix as for the main mix. By
choosing Independent Pan for a send, you can adjust the pan type and position settings for
the send independently from the pan type and position for the channel strip.
After you choose Independent Pan for a send, you can adjust the send’s panning by
setting the send to Sends on Faders mode. In this mode, the fader controls the volume to
the send, and the pan knob controls the pan type and position to the send. To learn more
about panning and balance, see Set channel strip pan or balance positions.
Set Independent Pan mode for a send
In Logic Pro, from the Send pop-up menu, choose Independent Pan.
Copy the current channel strip pan setting to a send
You can copy pan settings from a channel strip directly to a send using the Copy Pan to
Send command. Using this command, you can quickly set the panning for a send without
having to first enter Sends on Faders mode and make adjustments.
In Logic Pro, from the Send pop-up menu, choose Copy Pan to Send