10.6

Table Of Contents
342Logic Pro User Guide
Remove overlaps between regions
1. In Logic Pro, select the overlapping regions, or select all regions on the track by clicking
the track header.
2. Choose Edit > Trim > Remove Overlaps (or press \).
Where the selected regions overlap, the length of the left (earlier) region is reduced to
remove the overlap.
Remove overlaps by reducing the length of the later region
1. In Logic Pro, select the left (earlier) region of a pair of overlapping regions.
2. Choose Edit > Trim > Remove Overlaps (or press \).
Where the regions overlap, the length of the right (later) region is reduced to remove
the overlap.
Lengthen regions to remove gaps between them
1. In Logic Pro, select the regions you want to lengthen.
2. Choose Edit > Trim > Region End to Next Region (or use the corresponding key
command).
The selected regions are lengthened to end at the start point of the next region on the
track.
Lengthen selected regions between locators
1. In Logic Pro, set the left and right locator positions by doing one of the following:
Drag from left to right across the upper part of the ruler.
Set the value in the locator fields in the LCD.