10.6

335Logic Pro User Guide
Insert a gap between regions using the locators (the cycle length)
1. In Logic Pro, set the left and right locator positions by doing one of the following:
• Drag from left to right across a portion of the ruler.
• Set the values in the locator fields in the LCD.
2. Select the regions you want to move by the cycle length. If no selection is made, all
regions that fall between the locators are affected.
Clicking the Insert Silence button in the toolbar also affects all regions that fall between
the locators.
3. Choose Edit > Cut/Insert Time > Insert Silence Between Locators (or use the
corresponding key command).
• For selected regions that are longer than the cycle length: Regions are cut at the
left locator position; the second region (newly created from the cut) is moved to the
right of the right locator position, creating a gap between the regions.
• For selected regions that fall wholly within the locators: Regions that began at the
left locator position now begin at the right locator position.
• For a combination of partially and wholly selected regions that fall within the
locators: The encompassed section is cut, and moved to the right locator position.
Remove gaps between regions
1. In Logic Pro, select the regions.
2. Do one of the following:
• Choose Edit > Move > Shuffle Left within Selection (or use the corresponding key
command).
The first selected region on each track remains unchanged, and all subsequent
regions are moved to the left:
• Choose Edit > Move > Shuffle Right within Selection (or use the corresponding key
command).