X

Chapter 4 Mackie Control 69
Alternate Send edit mode options
Hold down the SEND button to access the alternate Send edit mode options submenu in the
LCD. The mode display shows S_ or S_., depending on whether you are in Send Mixer view or
Send Channel view.
Control Action
V-Pot 1 or F1 Switches to Send Mixer view and selects destination.
V-Pot 2 or F2 Switches to Send Mixer view and selects send level.
V-Pot 3 or F3 Switches to Send Mixer view and selects position.
V-Pot 4 or F4 Switches to Send Mixer view and selects mute.
V-Pot 5 or F5 Switches to Send Channel view.
V-Pot 6 or F6 Switches to Send Channel Strip 2 view: This mode
is similar to Send Channel view, but parameters are
arranged in a slightly dierent way. You can control
one parameter for all Send slots used in the selected
channel strip.
•
The mode display shows “SE.” (Send channel strip).
•
The upper LCD row shows the name of the channel
strip, the text “Sends,” the page number, and total
number of pages.
•
V-Pots 1 to 8 edit the displayed parameter.
•
The horizontal cursor buttons shift between pages.
The number of parameters that can be displayed
simultaneously depends on the number of
Mackie Control XTs you have.
V-Pot 7 or F7 Switches to Destination/Level Mixer view. In this
mode, you can control one Send slot for all channel
strips. Each channel strip corresponds to the channel
strip name shown in the upper LCD row.
•
The mode display shows d1 to d8, indicating the
selected send.
•
The upper LCD row shows channel strip names.
•
The lower LCD row shows the destination of the
selected send.
•
Rotating a V-Pot preselects the send destination.
•
Pressing a V-Pot conrms the preselected send
destination.
•
The SOLO buttons edit send position—a lit SOLO
LED indicates Pre Fader mode.
•
The MUTE buttons set the send mute state.
•
The faders edit the send level.