X

Chapter 3 Controller assignments 43
Dene a zone
1 Choose Logic Pro > Control Surfaces > Controller Assignments (or press Command-K), then click
the Expert View button.
2 Click the Add button in the lower-left corner of the Zone list.
A new, blank zone appears in the Zone list. It is highlighted, allowing you to immediately
rename it.
3 Enter a name for the zone.
If you want to add controllers to the zone, see Assign and delete controllers in Expert view on
page 41.
Dene a mode
1 Choose Logic Pro > Control Surfaces > Controller Assignments (or press Command-K), then click
the Expert View button.
2 Click the Add button in the lower-left corner of the Mode list.
A new, blank mode appears in the Mode list. It is highlighted, allowing you to immediately
rename it.
3 Enter a name for the mode.