X

Chapter 25 Yamaha DM2000 278
DM2000 assignable keys
The table outlines the USER-DEFINED KEY controls and their assignments.
Note: A modier button (such as USER 4, preassigned to SHIFT/ADD) shown below a control
description indicates that the control has an alternate function while the modier is held down.
Modier buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the button name.
Control Modier Assignment
DISPLAY Opens or closes the Audio Bin
window.
1 Opens or closes the Control bar
window.
2 Shifts channel strips by one bank
to the left.
3 Shifts channel strips by one bank
to the right.
4 Shifts to second function/use of
some buttons. (See descriptions of
other buttons.)
5 While held down, Value Change
mode is set to Full. Turning the
encoder to the right sets the
maximum value. Turning it to the
left sets the minimum value. The
encoder also stops at its default
value. Also see description of other
buttons.
6 Enters Group Edit mode:
•
When a channel strip group
is selected, channel strip
membership is indicated by a lit
SEL button. Use this button to
enable/disable channel strip’s
group membership.
•
Virtual encoders 1 to 4 display
properties of the currently
selected group.
•
Virtual encoder buttons 1 to 4
enable/disable properties of the
currently selected group.
•
When INSERT/PARAM is set to
PARAM, the left and right Tab
Scroll buttons scroll through
the group properties. When set
to INSERT, the buttons scroll
through the groups for editing.
*USER 4 Switches the Mixer to show all
channel strips that correspond to
tracks used in the Tracks window,
along with their signal ow.