X

Chapter 25 Yamaha DM2000 277
DM2000 channel strips
The table outlines the channel strip controls and their assignments.
Note: A modier button (such as USER 4, preassigned to SHIFT/ADD) shown below a control
description indicates that the control has an alternate function while the modier is held down.
Modier buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the button name.
Control Modier Assignment
Encoder Adjusts parameter selected in the
ENCODER MODE and AUX SELECT
sections.
Encoder Select button Pan selected: sets pan to center
position.
If MATRIX 1 on Send 1 to 8 is
selected: edits Send pre/post
position, Send mute on or o, or
sets Send level to default value.
Send Assign, Input, or Output
selected: conrms selection.
AUTO Cycles through automation modes.
With an automation mode button
held down, sets this automation
mode.
SEL If ENCODER MODE [ASSIGN 4] o:
selects channel strip.
If ENCODER MODE [ASSIGN 4] on:
•
BYPASS o: selects channel strip
for plug-in selection.
•
BYPASS on: switches bypass
state of currently selected Insert
slot.
*USER 4 Resets the volume level.
MATRIX SELECT 1 Resets the volume level.
SOLO Enables or disables the Solo
button.
*USER 5 Disables Solo button of all channel
strips.
ON Enables or disables the Mute
button.
*USER 5 Unmutes all channel strips.
Channel strip display Displays channel strip name, or
send, input, or output assignment.
Fader Adjusts volume, or duplicates
encoder assignment in Flip mode.