X

Chapter 25 Yamaha DM2000 272
DM2000 Automix controls
The table outlines the AUTOMIX controls and their assignments.
Note: A modier button (such as USER 4, preassigned to SHIFT/ADD) shown below a control
description indicates that the control has an alternate function while the modier is held down.
Modier buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the button name.
Control Modier Assignment
DISPLAY When DISPLAY is held down in
Channel Display mode, the display
shows the automation mode of
the channel strips in the current
bank selection.
REC Sets selected channel strip, or
channel strip group, to Write
automation mode. While held
down, and with the STEREO
channel strip AUTO button
enabled, sets automation mode
to Write.
*USER 5 Sets all channel strips to Write
automation mode.
ABORT/UNDO Sets selected channel strip, or
channel strip group, to Touch
automation mode. While held
down, and with the STEREO
channel strip AUTO button
enabled, sets automation mode to
Touch.
*USER 5 Sets all channel strips to Touch
automation mode.
AUTOREC Sets selected channel strip, or
channel strip group, to Latch
automation mode. While held
down, and with the STEREO
channel strip AUTO button
enabled, sets automation mode
to Latch.
*USER 5 Sets all channel strips to Latch
automation mode.
RETURN Sets selected channel strip, or
channel strip group, to Read
automation mode. While held
down, and with the STEREO
channel strip AUTO button
enabled, sets automation mode
to Read.
*USER 5 Sets all channel strips to Read
automation mode.