X

Chapter 25 Yamaha DM2000 271
Control Modier Assignment
Moving virtual encoders 1 to 4
(Use cursor keys, and then rotate
parameter wheel.)
Pan Assignment mode:
•
Parameter control 1 edits pan or
surround angle.
•
Parameter control 2 edits
surround diversity.
•
Parameter control 3 edits
surround LFE level.
•
Parameter control 4 edits
spread.
Send Assignment mode:
•
Controls the Send level of Sends
1 to 4 or 5 to 8.
Plug-in Assignment mode:
•
Chooses Insert slot 1 to 4 or 5
to 8.
Plug-in Edit mode:
•
Sets value.
DM2000 LCD
The table outlines the LCD assignments:
Display Assignment
TIME CODE Active if counter is displaying SMPTE timecode.
BEATS Active if counter is displaying bars/beats/divisions/
ticks.
Counter Displays SMPTE timecode or bars/beats/divisions/
ticks.
SELECT ASSIGN Displays the encoder assignment as follows: Pan, Snd1
to Snd8, S1As to S8As, In, Out.
DM2000 Track Arming controls
The table outlines the TRACK ARMING controls and their assignments.
Note: A modier button (such as USER 4, preassigned to SHIFT/ADD) shown below a control
description indicates that the control has an alternate function while the modier is held down.
Modier buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the button name.
Control Modier Assignment
1 to 24 Enables or disables the Record
Enable button of the specied
channel strip.
*USER 5 Disables the Record Enable
buttons of all channel strips.
MASTER Disables the Record Enable
buttons of all channel strips.