X

Chapter 25 Yamaha DM2000 270
DM2000 Eect/Plug-in controls
The table outlines the EFFECT/PLUG-IN controls and their assignments.
Note: A modier button (such as USER 4, preassigned to SHIFT/ADD) shown below a control
description indicates that the control has an alternate function while the modier is held down.
Modier buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the button name.
Control Modier Assignment
Display Opens or closes the Sample Editor.
6 Switches display between “track
name/parameter name” and
“parameter name/parameter value”
modes.
7 Switches the bypass state of Insert
slot that is currently being edited.
8 Switches between Plug-in
Assignment and Plug-in Edit
modes.
Parameter Up & Parameter Down Plug-in Edit mode: shifts the
parameter display to show the
next/previous page of parameter
controls (usually four) for the
selected plug-in.
*USER 13 Plug-in Edit mode: shifts the
parameter display up/down by
one parameter for the selected
plug-in.
Selecting virtual encoders 1 to 4
(Use cursor keys, and then press
ENTER button.)
Pan Assignment mode:
•
Parameter control 1 button
centers pan or surround angle.
•
Parameter control 2 button
centers surround diversity.
•
Parameter control 3 button
resets surround LFE level.
•
Parameter control 4 button
resets spread.
Send Assignment mode:
•
Enables or disables Sends 1 to 4
or 5 to 8.
Plug-in Assignment mode:
•
Conrms the plug-in selection
for Insert slots 1 to 4 or 5 to 8,
and enters Plug-in Edit mode for
the selected Insert slot.
Plug-In Edit mode:
•
Sets value to default, or switches
buttons with two states.