X

Chapter 25 Yamaha DM2000 269
DM2000 Encoder and Fader Mode controls
The table outlines the ENCODER MODE and FADER MODE controls and their assignments:
Control Assignment
PAN
•
Assigns pan/surround control to encoders.
•
In Insert Display mode, assigns pan/surround
parameters of the selected channel strip to virtual
encoders.
•
In Channel Display mode, assigns pan/surround
parameters of the 16 channel strips in current bank
selection to virtual encoders.
AUX/MTRX
•
Assigns Send level control to encoders.
•
In Insert Display mode, assigns Send level
parameter of the selected channel strip to virtual
encoders.
•
In Channel Display mode, assigns Send level
parameters of the 16 channel strips in current bank
selection to virtual encoders.
ASSIGN 1 Assigns channel strip input assignment to encoders.
While held down, the channel strip display shows the
current channel strip input assignment.
ASSIGN 2 Assigns channel strip output assignment to encoders.
While held down, the channel strip display shows the
current channel strip output assignment.
ASSIGN 3 When encoders display a Send level, switches them
to Send Destination assignment mode. Press the
encoder button (or ASSIGN 3 again) to conrm the
assignment.
ASSIGN 4 Determines mode of channel strip SEL buttons:
•
Indicator o: SEL button used for channel strip
selection
•
Indicator on: SEL button used for insert selection
or insert bypass, depending on MATRIX SELECT
[MATRIX 4]
FADER Enables or disables Flip mode.
AUX/MTRX Enables or disables Flip mode.
DM2000 Display Access controls
The table outlines the DISPLAY ACCESS controls and their assignments.
Note: A modier button (such as USER 4, preassigned to SHIFT/ADD) shown below a control
description indicates that the control has an alternate function while the modier is held down.
Modier buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the button name.
Control Modier Assignment
METER Clears overload LEDs.
*USER 4 Switches the Mixer to the All view,
displaying all channel strips that
exist in your project.
*USER 13 Opens or closes a second Tracks
window.