X

Chapter 25 Yamaha DM2000 268
DM2000 Aux Select controls
The table outlines the AUX SELECT controls and their assignments.
Note: A modier button (such as USER 4, preassigned to SHIFT/ADD) shown below a control
description indicates that the control has an alternate use while the modier is held down.
Modier buttons that need to be assigned manually by the user are shown with an asterisk (*)
that precedes the button name.
Control Modier Assignment
AUX 1 In Insert Display mode:
•
Assigns Send 1 level of channel
strips to encoders.
•
Assigns Send 1 level of the
selected channel strip to virtual
encoders.
•
Assigns Sends 1 to 4 of the
selected channel strip to virtual
encoders. Use the ENTER button
to switch the bypass state of
Sends 1 to 4.
In Channel Display mode:
•
Assigns Send 1 level of channel
strips to encoders and virtual
encoders.
Shows current Send 1 destination
assignment, when button is held
down.
*USER 4 Same as AUX 5, but for Send 6
AUX 2 Same as AUX 1, but for Send 2
*USER 4 Same as AUX 5, but for Send 7
AUX 3 Same as AUX 1, but for Send 3
*USER 4 Same as AUX 5, but for Send 8
AUX 4 Same as AUX 1, but for Send 4
AUX 5 In Insert Display mode:
•
Assigns Send 5 level of channel
strips to encoders.
•
Assigns Send 5 level of the
selected channel strip to virtual
encoders.
•
Assigns Sends 5 to 8 of the
selected channel strip to virtual
encoders. Use the ENTER button
to switch the bypass state of
Sends 5 to 8.
In Channel Display mode:
•
Assigns Send 5 level of channel
strips to encoders and virtual
encoders.
Shows current Send 5 destination
assignment, when button is held
down.