X

266
Set up your DM2000
Follow the steps below before using your DM2000 with Logic Pro.
•
Make sure that your DM2000 device is connected to the computer via USB.
•
Make sure that the latest USB MIDI driver for the device is installed. Visit the manufacturer’s
website to download the most recent driver version, if necessary.
Set up your DM2000 with Logic Pro
1 On the DM2000 device, do the following:
•
Press the DISPLAY ACCESS [SETUP] button repeatedly, until the Setup > MIDI/Host page is
visible.
•
Use the cursor buttons to move to the rst DAW parameter box in the SPECIAL FUNCTIONS
section, and rotate the parameter wheel to select USB and 1–3.
•
Press the DISPLAY ACCESS [REMOTE] button, and then press the [F1] button. The Remote 1
page is displayed.
•
Rotate the parameter wheel to choose General DAW as the TARGET parameter.
•
Press the LAYER [REMOTE 1] button.
2 In Logic Pro:
When you open Logic Pro, the DM2000 device is installed automatically. You should see three
DM2000 icons in the Setup window, aligned horizontally.
DM2000 assignments
DM2000 assignments overview
These sections outline the assignment of Yamaha DM2000 interface elements to Logic functions.
•
DM2000 Matrix Select controls on page 267
•
DM2000 Aux Select controls on page 268
•
DM2000 Encoder and Fader Mode controls on page 269
•
DM2000 Display Access controls on page 269
•
DM2000 Eect/Plug-in controls on page 270
•
DM2000 LCD on page 271
•
DM2000 Track Arming controls on page 271
•
DM2000 Automix controls on page 272
•
DM2000 Locator controls on page 274
•
DM2000 transport and cursor controls on page 275
•
DM2000 channel strips on page 277
•
DM2000 assignable keys on page 278
Yamaha DM2000
25