X

Chapter 24 Yamaha DM1000 263
Control Modier Assignment
DAW SUSPEND GRP Enables or disables the Group
Clutch.
*DAW SHIFT/ADD Switches the Mixer to show all
channel strips that correspond to
tracks used in the Tracks window,
along with their signal ow.
DAW CREATE GROUP Creates a new group and enters
Group Edit mode (see above).
*DAW SHIFT/ADD Switches the Mixer to the All view,
displaying all channel strips that
exist in your project.
The channel strips on your
DM1000 device will also reect the
All Channel Strip view.
DAW WIN MIX/EDIT Switches between the Tracks
window and the Mixer.
DAW CHANNEL - Shifts channel strips by one
channel strip to the left.
DAW CHANNEL+ Shifts channel strips by one
channel strip to the right.
DAW CTRL/CLUTCH While held down, all groups are
disabled.
DAW ALT/FINE While held down, Value Change
mode is set to Fine: value changes
work at maximum resolution. Also
see description of other buttons.
DAW MONI STATUS —
DAW UNDO Performs an Undo of the last
editing operation.
*DAW SHIFT/ADD Performs a Redo of the last Undo
operation.
*DAW OPTION/ALL Opens the Undo History window.
DAW SAVE Saves the project.
*DAW OPTION/ALL Performs a Save As operation,
allowing you to save the project
with a dierent name.
DAW WIN MEM-LOC Opens or closes the Marker tab in
the Lists area.
DAW EDIT TOOL Selects the next tool. While held
down, numerical buttons select a
specic tool.
DAW WIN INSERT Opens or closes the Sample Editor.
DAW REC/RDY ALL Disables the Record Enable
buttons of all channel strips.
DAW SCRUB Enables or disables Scrub mode.
DAW SHUTTLE Enables or disables Shuttle mode.
DAW REW Shuttles backward.