X

Chapter 24 Yamaha DM1000 261
DM1000 channel strips
The table outlines the channel strip controls and their assignments.
Note: A modier button, such as SHIFT/ADD, shown below a control description indicates that
the control has an alternate function while the modier is held down. Modier buttons that
need to be assigned manually by the user are shown with an asterisk (*) that precedes the
button name.
Control Modier Assignment
Encoder Adjusts parameter selected in the
ENCODER MODE and AUX SELECT
sections.
Encoder Select button Pan selected: sets pan to center
position.
Send 1 to 8 selected: edits Send
pre/post position, Send mute on
or o, or sets Send level to default
value.
Send Assign, Input, or Output
selected: conrms selection.
SEL If AUTO o:
•
AUX 8 o: selects channel strip.
•
AUX 8 on: selects channel strip
for insert assignment.
If AUTO on:
•
Cycles through automation
modes. With an automation
mode button held down, sets
this automation mode.
*DAW SHIFT/ADD Resets the volume level.
SOLO Enables or disables the Solo
button.
*DAW OPTION/ALL Disables Solo button of all channel
strips.
ON Enables or disables the Mute
button.
*DAW OPTION/ALL Unmutes all channel strips.
Fader Adjusts volume, or duplicates
encoder assignment in Flip mode.
DM1000 stereo channel strip control
The table outlines the stereo channel strip control and its assignment:
Control Assignment
AUTO Switches channel strip SEL buttons between channel
and insert selection duties.