X

Chapter 24 Yamaha DM1000 260
Channel display mode
Press the F3 button to select Channel display mode. In this mode, the parameter controls, such as
pan and send level, for channel strips 1 to 16 are displayed.
Control Assignment
Selecting virtual encoders 1 to 4 (Use cursor keys, and
then press ENTER button.)
When Send 1 to 8 is selected: edits Send pre/post
fader position, enables or disables Send mute, or sets
Send level to default value.
Send, Input, or Output Assignment mode: conrms
selection.
Moving virtual encoders 1 to 4 (Use cursor keys, and
then rotate parameter wheel.)
Adjusts parameter selected in the ENCODER MODE
and AUX SELECT sections.
Meter display mode
Press the F4 button to select Meter display mode. In this mode, the level meters for channel
strips 1 to 16 are displayed.
Control Assignment
Level Meters Display momentary and peak level.
DM1000 data entry controls
The table outlines the data entry controls and their assignments.
Note: A modier button, such as SHIFT/ADD, shown below a control description indicates that
the control has an alternate function while the modier is held down. Modier buttons that
need to be assigned manually by the user are shown with an asterisk (*) that precedes the
button name.
Control Modier Assignment
Parameter wheel Default: adjusts the value of the
currently selected parameter.
* DAW SHUTTLE Switches the parameter wheel to
Shuttle mode.
* DAW SCRUB Switches the parameter wheel to
Scrub mode.
[DEC] button Default: exits folder.
In Go to Marker dialog: cancels
dialog.
* DAW ALT/FINE Opens or closes the Audio Bin tab
in the Media area.
[INC] button Enters the selected folder.