X

Chapter 24 Yamaha DM1000 257
Control Modier Assignment
AUX 6 Switches SEL buttons and encoder
buttons between normal behavior
and setting a parameter’s default
value. When the AUX 6 button is
held down:
•
Pressing a channel strip’s SEL
button resets the channel strip’s
volume level.
•
Pressing a channel strip’s
encoder button resets the
channel strip’s pan/surround
value. (PAN also needs to be
selected in the ENCODER MODE
section.)
AUX 8 Determines mode of channel strip
SEL buttons when the STEREO
section AUTO button is o:
•
AUX 8 indicator o: SEL button
used for channel strip selection
•
AUX 8 indicator on: SEL button
used for Insert selection
DM1000 Encoder and Fader Mode controls
The table outlines the ENCODER MODE and FADER MODE controls and their assignments:
Control Assignment
PAN
•
Assigns pan/surround control to encoders.
•
In Insert Display mode, assigns pan/surround
parameters of the selected channel strip to virtual
encoders.
•
In Channel Display mode, assigns pan/surround
parameters of the 16 channel strips in current bank
selection to virtual encoders.
AUX
•
Assigns Send level control to encoders.
•
In Insert Display mode, assigns Send level
parameter of the selected channel strip to virtual
encoders.
•
In Channel Display mode, assigns Send level
parameters of the 16 channel strips in current bank
selection to virtual encoders.
FADER/AUX Enables or disables Flip mode.