X

Chapter 24 Yamaha DM1000 255
DM1000 Display Access controls
The table outlines the DISPLAY ACCESS controls and their assignments.
Note: A modier button, such as SHIFT/ADD, shown below a control description indicates that
the control has an alternate use while the modier is held down. Modier buttons that need to
be assigned manually by the user are shown with an asterisk (*) that precedes the button name.
Control Modier Assignment
AUTOMIX When AUTOMIX is held down in
Channel Display mode, the display
shows the automation mode of
the 16 channel strips in the current
bank selection.
PAIR/GROUP Enters Group Edit mode:
•
When a channel strip group
is selected, channel strip
membership is indicated by a
lit SEL button. Use this button
to enable/disable the channel
strip’s group membership.
•
Virtual encoders 1 to 4 display
properties of the currently
selected group.
•
Virtual encoder buttons 1 to 4
enable/disable properties of the
currently selected group.
•
When INSERT/PARAM is set to
PARAM, the left and right Tab
Scroll buttons scroll through
the group properties. When set
to INSERT, the buttons scroll
through the groups for editing.
*DAW SHIFT/ADD Switches the Mixer to show all
channel strips that correspond to
tracks used in the Tracks window,
along with their signal ow.
METER Clears overload LEDs.
*DAW SHIFT/ADD Switches the Mixer to the All view,
displaying all channel strips that
exist in your project.
*DAW ALT/FINE Opens or closes a second Tracks
window.
EFFECT Opens or closes the Sample Editor.