X

254
Set up your DM1000
Follow the steps below before using your DM1000 with Logic Pro.
•
Make sure that your DM1000 device is connected to the computer via USB.
•
Make sure that the latest USB MIDI driver for the device is installed. Visit the manufacturer’s
website to download the most recent driver version, if necessary.
Set up your DM1000 with Logic Pro
1 On the DM1000 device, do the following:
•
Press the DISPLAY ACCESS [SETUP] button repeatedly, until the Setup > MIDI/Host page is
visible.
•
Use the cursor buttons to move to the DAW parameter box in the SPECIAL FUNCTIONS
section, and rotate the parameter wheel to select USB and 1–3.
•
Press the DISPLAY ACCESS [REMOTE] button, and then press the [F1] button. The Remote 1
page is displayed.
•
Rotate the parameter wheel to choose General DAW as the TARGET parameter.
•
Press the LAYER [REMOTE 1] button.
2 In Logic Pro:
When you open Logic Pro, the DM1000 device is installed automatically. You should see two
DM1000 icons in the Setup window, aligned horizontally.
DM1000 assignments
DM1000 assignments overview
These sections outline the assignment of Yamaha DM1000 interface elements to Logic functions.
•
DM1000 Display Access controls on page 255
•
DM1000 Aux Select controls on page 256
•
DM1000 Encoder and Fader Mode controls on page 257
•
DM1000 LCD controls on page 258
•
DM1000 LCD display modes overview on page 258
•
DM1000 data entry controls on page 260
•
DM1000 channel strips on page 261
•
DM1000 stereo channel strip control on page 261
•
DM1000 assignable keys on page 262
Yamaha DM1000
24