X

Chapter 23 Yamaha 02R96 249
02R96 Eect/Plug-in controls
The table outlines the EFFECT/PLUG-IN controls and their assignments:
Control Assignment
Display Opens or closes the Sample Editor.
PLUG-INS Switches SEL buttons and encoder buttons between
normal behavior and setting a parameter’s default
value.
CHANNEL INSERTS Determines mode of channel strip SEL buttons:
•
Indicator o: SEL button used for channel strip
selection
•
Indicator on: SEL button used for Insert selection
2 Switches the display between “track name/parameter
name” and “parameter name/parameter value” modes.
3 Switches the bypass state of plug-in currently being
edited.
4 Switches between Plug-in Assign and Plug-in Edit
modes.
Parameter Up & Parameter Down Plug-in Edit mode: shifts the parameter display to
show the next/previous page of parameter controls
(usually four) for the selected plug-in.
Selecting virtual encoders 1 to 4 (Use cursor keys, and
then press ENTER button.)
Pan Assignment mode:
•
Parameter control 1 button centers pan or surround
angle.
•
Parameter control 2 button centers surround
diversity.
•
Parameter control 3 button resets surround LFE
level.
•
Parameter control 4 button resets spread.
Send Assignment mode:
•
Enables or disables Sends 1 to 4 or 5 to 8.
Plug-in Assignment mode:
•
Conrms the plug-in selection for Insert slots 1 to
4 or 5 to 8, and enters Plug-in Edit mode for the
selected Insert slot.
Plug-in Edit mode:
•
Sets value to default, or switches buttons with two
states.
Moving virtual encoders 1 to 4 (Use cursor keys, and
then rotate parameter wheel.)
Pan Assignment mode:
•
Parameter control 1 edits pan or surround angle.
•
Parameter control 2 edits surround diversity.
•
Parameter control 3 edits surround LFE.
•
Parameter control 4 edits spread.
Send Assignment mode:
•
Controls the Send level of Sends 1 to 4 or 5 to 8.
Plug-in Assignment mode:
•
Chooses Insert slot 1 to 4 or 5 to 8.
Plug-in Edit mode:
•
Sets value.