X

Chapter 23 Yamaha 02R96 248
02R96 Display Access control
The table outlines the DISPLAY ACCESS control assignment:
Control Assignment
METER Clears overload LEDs.
02R96 Aux Select controls
The table outlines the AUX SELECT controls and their assignments:
Control Assignment
AUX 1 Assigns Send 1 level to encoders, and Send 1 to
4 levels to virtual encoders. While held down, the
channel strip display shows the current Send 1
destination assignment.
AUX 2 Assigns Send 2 level to encoders, and Send 1 to
4 levels to virtual encoders. While held down, the
channel strip display shows the current Send 2
destination assignment.
AUX 3 Assigns Send 3 level to encoders, and Send 1 to
4 levels to virtual encoders. While held down, the
channel strip display shows the current Send 3
destination assignment.
AUX 4 Assigns Send 4 level to encoders, and Send 1 to
4 levels to virtual encoders. While held down, the
channel strip display shows the current Send 4
destination assignment.
AUX 5 Assigns Send 5 level to encoders, and Send 5 to
8 levels to virtual encoders. While held down, the
channel strip display shows the current Send 5
destination assignment.
02R96 Encoder and Fader Mode controls
The table outlines the ENCODER MODE and FADER MODE controls and their assignments:
Control Assignment
PAN Assigns pan to encoders; assigns selected channel
strip’s pan/surround parameters to virtual encoders.
AUX Assigns Send 1 level to encoders, and Send 1 to
4 levels to virtual encoders. While held down, the
channel strip display shows the current Send 1
destination assignment.
FADER Enables or disables Flip mode.
AUX/MTRX Enables or disables Flip mode.