X

247
Set up your 02R96
Follow the steps below before using your 02R96 with Logic Pro.
•
Make sure that your 02R96 device is connected to the computer via USB.
•
Make sure that the latest USB MIDI driver for the device is installed. Visit the manufacturer’s
website to download the most recent driver version, if necessary.
Set up your 02R96 with Logic Pro
1 On the 02R96 device, do the following:
•
Press the DISPLAY ACCESS [DIO/SETUP] button repeatedly, until the Setup > MIDI/Host page is
visible.
•
Use the cursor buttons to move to the rst DAW parameter box in the SPECIAL FUNCTIONS
section, and rotate the parameter wheel to select USB and 1–2.
•
Press the DISPLAY ACCESS [DIO/SETUP] button repeatedly, until the Setup > Remote page is
visible.
•
Rotate the parameter wheel to choose General DAW as the TARGET parameter.
•
Press the LAYER [REMOTE] button.
2 In Logic Pro:
When you open Logic Pro, the 02R96 device is installed automatically. You should see three
02R96 (USB 1–3) icons in the Setup window, aligned horizontally.
02R96 assignments
02R96 assignments overview
These sections outline the assignment of Yamaha 02R96 interface elements to Logic functions.
•
02R96 Display Access control on page 248
•
02R96 Aux Select controls on page 248
•
02R96 Encoder and Fader Mode controls on page 248
•
02R96 Eect/Plug-in controls on page 249
•
02R96 LCD on page 250
•
02R96 assignable keys on page 251
•
02R96 channel strips on page 252
•
02R96 Machine Control parameters on page 252
•
02R96 data entry controls on page 253
Yamaha 02R96
23