X

Chapter 22 Yamaha 01V96 241
Channel display mode
Press the F3 button to select Channel display mode.
Control Assignment
Moving virtual encoders 1 to 4 (Use cursor keys, and
then rotate parameter wheel.)
Adjusts parameter selected in the ENCODER MODE
and AUX SELECT sections.
Selecting virtual encoders 1 to 4 (Use cursor keys, and
then press ENTER button.)
When Send 1 to 8 is selected: edits send pre/post
fader position, enables or disables send mute, or sets
send level to default value. Send, Input, or Output
Assignment mode: conrms selection.
Meter display mode
Press the F4 button to select Meter display mode.
Control Assignment
Level Meters Display momentary and peak level.
01V96 Selected Channel control
The table outlines the SELECTED CHANNEL control and assignment:
Control Assignment
Pan control Adjusts the pan of the currently selected channel
strip.
01V96 data entry controls
The table outlines the data entry controls and their assignments.
Note: A modier button (such as SHIFT/ADD) below a control description indicates that the
control has an alternate use while the modier is held down. Modier buttons that need to be
assigned manually by the user are shown with an asterisk (*) that precedes the control name.
Control Modier Assignment
Parameter wheel Default: adjusts the value of the
currently selected parameter.
*DAW SHUTTLE Switches the parameter wheel to
Shuttle mode.
*DAW SCRUB Switches the parameter wheel to
Scrub mode.
[DEC] button Default: exits folder. In Go to
Marker dialog: cancels dialog.
*DAW ALT/FINE Opens or closes the Audio Bin tab
in the Media area.
[INC] button Enters the selected folder.